iglidur® JVFM, clearance-free prestressed bearing with flange, mm

iglidur® J | The versatile endurance runner

iglidur® J is characterised above all by the lowest coefficients of friction in dry operation and its very low stick-slip tendency. With a maximum recommended surface pressure of 35MPa, iglidur® J is not suitable for extreme loads.

Typical application areas

• Vending machinery
• Printing industry
• Beverage industry
• Aviation
• Cleanroom

When to use it?

• At high speeds
• When highest wear resistance is required at low to medium pressure loads
• When lowest wear is required with a variety of different shafts
• When low coefficients of friction in dry operation is required
• When the material should be vibration-dampening
• When good chemical resistance is required 
• Best behaviour with soft shafts
• Low moisture absorption

When not to use it?

• If high pressure loads occur
• If short-term temperatures greater than +120°C occur
• If a cost-effective material is required for occasional movements