1 su 2
igus-icon-lupe
igus-three-dimensional-model
- Codice articolo: JSM-0104-02
- Materiale: iglidur® J
- Forma: Boccole cilindriche
- Dimensioni:
- d1 1.5 mm
- d2 4 mm
- b1 2 mm
- Regola le dimensioni
- Metodo di produzione: Stampaggio ad iniezione
- Durata madrevite:
- Un maratoneta versatile, molto resistente all'usura su (quasi) tutti gli alberi, con coefficienti d'attrito molto bassi
- Usura ridotta con materiali per albero diversi
- Bassi coefficienti d'attrito nel funzionamento a secco
- Riduzione delle vibrazioni
iglidur® J | The versatile endurance runner
iglidur® J is characterised above all by the lowest coefficients of friction in dry operation and its very low stick-slip tendency. With a maximum recommended surface pressure of 35MPa, iglidur® J is not suitable for extreme loads.
Typical application areas
- Vending machinery
- Printing industry
- Beverage industry
- Aviation
- Cleanroom
When to use it?
- At high speeds
- When highest wear resistance is required at low to medium pressure loads
- When lowest wear is required with a variety of different shafts
- When low coefficients of friction in dry operation is required
- When the material should be vibration-dampening
- When good chemical resistance is required
- Best behaviour with soft shafts
- Low moisture absorption
When not to use it?
- If high pressure loads occur
- If short-term temperatures greater than +120°C occur
- If a cost-effective material is required for occasional movements
Non sei sicuro che sia adatto?
