1 su 2
igus-icon-lupe
igus-three-dimensional-model
- Codice articolo: JFM-0304-03
- Materiale: iglidur® J
- Forma: Boccole flangiate
- Dimensioni:
- d1 3 mm
- d2 4.5 mm
- d3 7.5 mm
- b1 3 mm
- b2 0.75 mm
- Regola le dimensioni
- Metodo di produzione: Stampaggio ad iniezione
- Durata madrevite:
- Un maratoneta versatile, molto resistente all'usura su (quasi) tutti gli alberi, con coefficienti d'attrito molto bassi
- Usura ridotta con materiali per albero diversi
- Bassi coefficienti d'attrito nel funzionamento a secco
- Riduzione delle vibrazioni
iglidur® J | The versatile endurance runner
iglidur® J is characterised by the lowest coefficients of friction in dry operation and its very low stick-slip tendency. With a maximum recommended surface pressure of 35MPa, iglidur® J is not suitable for extreme loads.
Typical applications
- Vending machinery
- Printing industry
- Beverage industry
- Aviation
- Cleanroom
When to use it?
- For high speeds
- When highest wear resistance at low to medium pressures is required
- Low wear against different shafts
- When a low coefficient of friction in dry operation is requested
- For vibration dampening
- When good chemical resistance is required
- For best performance with soft shaft materials
- Low moisture absorption
When not to use it?
- When high pressure loads occur
- When temperatures of greater than +120°C occur in the short term
- When a cost-effective bearing for occasional movements is sought
Non sei sicuro che sia adatto?
